• Input voltage: AC90-240V, 50/60Hz
• Power: 350W
• LED: 7pcs*40W 4-in-1:RGBW LEDs;50000-100000 hours life span and low power consumption
• ZOOM: Linear motorized ZOOM from 6°to 60°angle
• Pan: 630°/540°/360°movement;8/16 bit smooth and precise resolution for Pan movement
• Tilt: 270°/180°/90°movement;8/16 bit smooth and precise resolution for Tilt movement
• Function: Frost effect
• Focusing: Electronic Focusing
• Linear dimming: 0-100% mechanical linear dimming
• Control mode: DMX512,Master-slave,sound,auto operation
• Scan position memory, auto reposition after unexpected movement
• DMX recorder and edit function integrated
• LED rainbow effect and pulse effect
• Shell: Flame-retardant plastic and aluminum alloy
• Features: Collection pattern, beam and soft light 3in1
• Strobe: 0-13 flasher/ second
• Control: DMX, master-slave, voice-activated, self-propelled
• Channel: 12CH
• Powercon IN/OUT
• Max ambient temperature: 45°C
• Product Dimension: 380mm*200mm*400mm
• Packing Dimension: 410mm*305mm*415mm
• Net Weight: 9.5kg
• Gross Weight: 12kg

This led  moving head  light is  widely used in stage show, DJ, Disco, studio, theatre, and entertainment events etc. It can control by DMX, master-slave, auto-running. And Sound control.Designed for medium to large stage use, this unit will provide bright-saturated colours on stage.

In order to make the lights in good condition and extend the life time, we suggest a regular cleaning to the lights:

• Clean the inside and outside lens each week to avoid the weakness of the lights due to accumulation of dust.
• Clean the fan each week.
• A detailed electric check by approved electrical engineer each three month, make sure that the circuit contacts are in good condition, prevent the poor contact of circuit from overheating.
• We recommend a frequent cleaning of the device. Please use a moist, lint-free cloth. Never use alcohol solvents.
• There are no serviceable parts inside the device. Please refer to the instructions under “Installation instructions”.
• Should you need any spare parts, please order genuine parts from your local dealer.

The following points have to be considered during the inspection:

• All screws for installing the devices or parts of the device have to be tightly connected and   
•    must not be corroded.
• There must not be any deformations on the housing, color lenses, fixations and installation
•    spots (ceiling, suspension, trussing).
• Mechanically moved parts must not show any traces of wearing and must not rotate with 
•    unbalances.
• The electric power supply cables must not show any damage, material fatigue or  sediments.
• Further instructions depending on the installation spot and usage have to be adhered by a skilled installer and any safety problems have to be removed.